An efficient water heater which can supply the house with hot water is one of the indispensable assets in modern culture. Therefore, there is need to understand how best to repair and maintain your water heater which we have shared with you above.
Below are some tips that you need to follow for Water Heater System Repair and maintain a water heater system properly.
This should be done before beginning the maintenance as well as repair of the water heater it will help to know what water heater you are dealing with.
There are several common types:
- Tank Water Heaters: These are the most common type, they have a large reservoir of hot water that is always in short supply.
- Tankless Water Heaters: These supply hot water on service and do not involve storage of the water and this may be more energy consuming.
- Solar Water Heaters: These use solar power to heat water and thus are renewable energy equipment.
Regular Maintenance Practices
In the case of tank water heaters, sediment deposition becomes a standard problem which affects efficacy as well as durability. It’s recommended to flush the tank at least once a year:
- Extinguish the electrical connection to the water heater or shut off the gas supply to the unit.
- Connect a hose to the bottom drain valve and turn it.
- One must turn the drain valve and let the tank to drain.
- This should be done until the water coming out of the hose is clear before one is closed and removed.
- Refill the tank and switch on the power supply or the gas as the case maybe.
Checking the Anode Rod
The anode rod helps to stop the rusting of the tank. It should be checked every two to three years:
- Shut the water and the electrical powers that supply the heater.
- Identify where the anode rod is and then take it away.
- If the rod is less than half an inch in thickness or is coated by calcium, then put it for replacement.
Common Problem Associated With Water Heaters
This might be because of one or many factors which may include; thermostat malfunctioned, heating element damaged, or a problem with the power supply. Look at these components and change them if needed.
Leaking Water Heater
Leak can mean anything ranging from a simple valve problem to a number of rusting tanks. Touch with bare hands or use any cloth to feel around the area with the tank and connections for any wetness. Reconnect and reconnect – if the tank itself is weak, it may be possible to just tighten loose connections, but if not, then the tank will have to be replaced.
Conclusion
Gurgling is generally caused by deposits on the walls of the pipe. This problem is usually eliminated by regular tank flushing. When these occur, the noises may be as a result of defective heating elements which should be replaced.
This is very important to ensure that your water heater’s lifetime and performance is not reduced. It assists in minimizing frequent repairs thus reducing costs It helps people get a constant proper supply of hot water.